Beta 680/3 Manual De Uso E Instrucciones página 18

EN I
OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
Do not apply a torque higher than the maximum recommended torque
USB Port
The USB cable supplied with the dynatester can also be used to connect it to a PC for torque readings
transmission.
If the dynatester is connected to the PC, a virtual COM port will appear in Device Management. The
COM port must be selected and configured to adapt to the software used to display the torque readings.
The torque readings will be sent to the PC whenever the RESET button is pressed in any mode and
whenever a peak value is restored (both manually, using the RESET button in the Dial or Click mode,
and automatically, in the Click mode).
If the PC does not recognize the dynatester correctly (for example, because Windows 7 is being used,
instead of Windows 10), download the USB driver from the web site: www.beta-tools.com
The USB port can also be used to update the software of the dynatester.
For USB driver and software updating, check out: www.beta-tools.com
MAINTENANCE
Repair and calibration jobs must be carried out by trained personnel only. For such jobs, you can
contact Beta Utensili S.P.A.'s repair centre.
DISPOSAL
The torque meter must be disposed of in accordance with the law provisions in force in the country
where it is used.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents
damage to the environment or human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste
and will give way to the application of such fines as provided for under current regulations.
WARRANTY
This equipment is manufactured and tested in accordance with current EU regulations. It is covered by
a 12-month warranty for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects, by fixing the defective
pieces or replacing them at our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this
warranty will remain unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls.
In addition, this warranty will no longer be valid if any changes are made, or if the pneumatic tool is
forced or sent to the customer service in pieces.
This warranty explicitly excludes any damage caused to people and/or things, whether direct or
consequential.
18