Sauder 417912 Instrucciones De Montaje página 11

Step 7
1
G
D36
Pull the DRAWER FRONT BRACKETS (9G) apart and slide
å
them into the grooves in the DRAWER SIDES (D36 and D37).
You may need to gently tap them in with a hammer.
NOTE: The DRAWER FRONT BRACKETS are marked "RH"
å
and "LH" for easy identifi cation.
Fasten the DRAWER FRONT (G) to the DRAWER FRONT
å
BRACKETS (9G). Use four SILVER 1/2" MACHINE SCREWS (38S)
through four SMALL WASHERS (77M).
3
Fasten the DRAWER BACK (D482) to the DRAWER SIDES (D36 and D37). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
www.sauder.com/services
Push down
9G
D37
D37
77M
Groove
SILVER 1/2" MACHINE SCREW
(4 used in this step)
D482
D36
2
38S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (B31) into the grooves
å
in the DRAWER SIDES (D36 and D37) and DRAWER
FRONT (G).
D37
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
417912
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the groove.
B31
U N
F I N
I S H
E D
D36
D37
G
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
Page 11