CLEANING AND MAINTENANCE
Disconnect range hood from power supply before cleaning or servicing.
Cleaning the surface of hood frequently. Use mild soap or detergent to clean the hood.
Do not use harsh alkalis or abrasives.
Avoid the use of scouring powers or dishwasher compounds.
Grease filter may be washed using mild soap or detergent. (Heavy grease build-up may
not be cleaned easily and the filter may require replacement).
Charcoal filter cannot be cleaned and must be replaced regularly.
Information
Cleaning water must not inter into motor, control switch etc. electrical parts.
It is recommendable to clean the metallic filter every three months by carrying out the following
instruction:
Remove the metallic filter from the cooker hood and wash it in asolution of water and neutral
liquid detergent, leaving to soak.
Rinse thoroughly with warm water and leave to dry.
The metallic filter may alter in color after several washes. This is notcause for customer
complaint or replacement of metallic filter.
Information
There is a fire risk if cleaning is not carried out in accordance with the instructions.
CHECK VALVE INSTALLATION
Hold on check valve with your hands, align the
box gap, put in the check valve , and then spin
to a certain angle until three anglesof the valve
are stuck. Installation is complete.
EN-10