SJE Rhombus Xpert Alert Manual De Consulta Rápida

Before You Begin
Mount and wire your alarm according to installation instructions.
NOTE:
• Cellular WiFi hotspots are not recommended for use with
this WiFi alarm, as intermittent or unreliable notifi cation
service can result.
• WPA2 Security must be enabled on the wireless router
for WiFi connections.
This quick start manual covers setup using a WiFi enabled device.
For setup using other network connection options, please see the
full setup manual at www.sjerhombus.com
Follow the steps to make any changes to notifi cation data after the initial setup has been performed.
STEP 1: WiFi Network Setup
Xpert Alert
Quick Start
WiFi Alarm
®
1. Press the Setup button on the Xpert Alert
WiFi alarm (the blue network status light will
fl ash continuously).
2. Using a WiFi enabled device, ensure WiFi is
turned on. Go to the device's WiFi settings and
select the WiFi network named
"Alarm XX-XX-XX-XX-XX-XX"
(XX... = alarm unit id).
3. If the setup page does not automatically
open, open a web browser and enter
setup.mywifi alarm.com in the address bar.
E1
®