SJE Rhombus Xpert Alert Manual De Consulta Rápida página 3

STEP 3: Verifi cation
1. An email will be sent to the Email Address 1 entered on the Notifi cation Setup page. Click this link
to accept the terms and conditions. If an email is not received, repeat the setup steps 1 and 2 to
verify the correct email address was entered.
2. If your device is connected to the same network as the alarm, you will be directed to the
Notifi cation Setup page. If all settings are correct, the setup page can be closed.
Note: There is no need to Restart the Alarm if changes were not made.
STEP 4: Setup Testing
1. Press the "TEST"
the alarm ring lights will activate while the "TEST"
2. Verify that an alarm notifi cation is received via email and/or text.
Note: It may take several minutes for the message to appear in your email inbox or message folder,
depending upon email server traffi c or other circumstances. If you have not received a notifi cation
within 5 minutes, verify the email address and/or cellular phone information is entered correctly and
that any email fi lters are set to allow messages from mywifi alarm@mywifi alarm.com.
While using a WiFi connection, a signal strength rating will also be sent with each alarm and power
restored notifi cations.
5.0 - 10.0 Great!
3.0 - 4.9 Good. No signal loss is expected.
2.0 - 2.9 Marginal. You may experience occasional signal loss.
0.0 - 1.9 Weak. Move alarm closer to wireless router.
button on the front of the Xpert Alert WiFi alarm. The alarm will sound and
®
button is being held.
E3