Caution!
While the appliance door is well installed, the door cover can also be taken o°, by this time.
1.
Removing the door cover means to set the inner glass of the appliance door free, the
glass can be easily moved and cause damage or injury.
As removing the door cover and inner glass means to reduce the overall weight of
2.
the appliance door. The hinges can be easier to be moved when closing the door and
you may be trapped. Keep your hands away from the hinges.
Because of the 2 points above, we strongly recommend you not to remove the door
cover unless the appliance door removed. Damage caused by incorrect operation is not
covered under warranty.
Rails
When you want have a good cleaning for the rails and cavity, you can remove the
shelves and clean it. In this way your appliance will retain its appearance and remain fully
functional for a long time to come.
1.
Pull the front part of the side rails horizontally to the opposite direction until the fea-
ture
gets out ; Later on you can remove the shelves out like the picture
2.
Put the side rail back into the cavity, first insert the rear part of the side rail into the
hole of the cavity correctly, and then insert the front part of
27
into the hole into.
①