Puqpress M2 Manual De Instrucciones página 19

CAUTION
6
Make sure the port-a-filter (group handle)
does not wiggle after adjusting.
4.3 Setting up the coffee grinder
CAUTION
6
Always place the PUQpress on a level,
vibration-free surface.
1. Slide the back of the PUQpress over the
edge of the table or bar where you want
to set-up. ��
2. Plug the power cable into the PUQpress.
��
3. Lift the coffee grinder with two people
and guide the power cable of the coffee
grinder from the top to the bottom of the
��
PUQpress.
4. Place the coffee grinder on the
��
PUQpress.
5. Guide the power cables of the PUQpress
and the coffee grinder through a power
��
cable entry.
CAUTION
6
Make sure to guide the cables through the
cable guide(s) and clip(s) on the bottom. Not
doing so may result in the cables getting
damaged.
6. Carefully slide the set-up back onto the
bar or table.
4.4
6
��
Never use the PUQpress if the PUQpress,
cable or plug is damaged. Any required
repairs may only be conducted by authorized
service personnel. For this reason, please
contact a customer service repair facility or
your dealer. Using the PUQpress if the
PUQpress, cable or plug is damaged may
result in electric shock, or injury.
1. Plug the other side of the power cable
2. Switch on the PUQpress by setting the
5
Your PUQpress is now in operating condition.
Now you only need to use PUQpress and
adjust the settings to create perfect coffee!
Refer to the chapter 'Safety instructions' for
more information.
5.1
5.1.1 Tools and materials
Required tools and materials
•
19
Switching on the PUQpress
WARNING
into a socket and/or (wall) outlet.
on/off switch to I.
OPERATION
Preparation
Port-a-filter (group handle) with
grounded coffee
EN