Puqpress M2 Manual De Instrucciones página 22

CAUTION
6
Make sure not to use a damp/wet cloth to
clean the tamper base. Grounded coffee will
stick to the tamper base.
7. Screw the tamper base back by turning
��
it clockwise.
8. Place the bolt.
9. Screw the bolt back by turning the Allen
��
key clockwise.
10. Turn the coffee grinder back to the
original position.
11. Press the set button again. The tamper
base moves upwards to the original
position.
6.3 Storing
Store the PUQpress indoors in a dry and
secure location, out of reach of children.
6.4 Maintaining
6.4.1 Servicing
Any required repairs may only be conducted
by authorized specialist personnel. For this
reason, please contact a customer service
repair facility or your dealer. Refer to the
safety instructions in chapter 'Safety
instructions'.
It is advised to conduct all maintenance and
repairs by a customer service centre or your
dealer.
If you have a new espresso machine with a
different tamper diameter, please contact
your local dealer. They can provide a new
tamping base and upper clamp and
interchange these parts.
There are two types of upper clamps
available. Which clamp you should use
depends on the diameter range of the
tamper base:
• Upper clamp 66 mm: Ø53 – 55 mm
• Upper clamp 71 mm: Ø56 – 59 mm
If the filter basket diameter of your new
espresso machine falls within the other
range as the one your PUQpress is suitable
for, both the upper clamp and the tamper
base need to be changed. If it falls within the
same range, only the tamper base needs to
be changed.
6.4.2 Ordering spare parts
Spare parts can be ordered from your
customer service centre or your local dealer.
To ensure quick and correct processing of
your order, the following information is
essential:
• Serial number
• Description of the part to be replaced.
Use the same name as the part is
specified as in chapter 'Main parts'.
22