Ferroli RIMINI DP 500 Instrucciones Para La Instalación Y El Uso página 58

The thermal emitter must be fixed to the wall using the adjustable brackets, screws and wall-
plugs supplied with the emitter, according to the instructions on the template printed on the box.
If for any reason the template is missing, you can follow the instructions below:
1. Make sure you keep your eye on where the lower hole on the wall is.
Model
RIMINI DP 50
RIMINI DP 75
RIMINI DP 100
RIMINI DP 120
RIMINI DP 150
(*) The first number corresponds to the number of plastic brackets on which the emitter hangs, and the
second number corresponds to the number of metal locking brackets which fixes the emitter to the wall.
2. Screw in each of the brackets using the lower hole and mark the upper holes of each
wall bracket.
3. Drill all the marked locations in the wall and in-
sert the wall-plugs, screw the brackets to the wall
and hang the emitter.
4. Metal locking bracket: Tighten the screw at the top of the bracket until emitter is locked
in position.
58
Dimensions (mm)
A B
160 80
240 160
320 160
400 240
560 320
No. of
brackets (*)
2 + 1
EN
RIMINI DP
A73021553