Care and cleaning
Cleaning the shelves
Upper end of
fixed leg
Lower end of
fixed leg
(The picture above is only for reference. The actual configura-
tion will depend on the physical product or statement by the dis-
tributor)
Remove cantilever shelves according to the arrows shown
as above:
1. Hold the front edge of shelf, and tilt the shelf inwards until the
lower end of fixed leg is separated from the slot of supporting
iron.
2. Lift the whole shelf until it can not rise anymore.
3. Take the shelf out horizontally.
Cleaning of freezer lower drawer
1. Pull out the lower freezer drawer to the proper position.
2. As shown in the figure, press the buttons in both slots re-
spectively (you must press both sides at the same time), pull
out the freezer drawer until it stops.
3. Take out the lower drawer as directed by the arrows.
14
2
1
Slot
During installation, put the upper end of the fixed leg into one of
the upper slots on the supporting iron first, then put the lower
end of the fixed leg into the third slot on the lower part of the
supporting iron.
Button
4. After cleaning, place back the drawer to original position,
then close the lower drawer, the button will lock the drawer
automatically.
Note: Do not remove the lower freezer drawer if not necessary.
3