Publicidad
Idiomas disponibles
Idiomas disponibles
Using the refrigerator
Changing the light
Any replacement or maintenance of the LED lamps should be
made by the manufacturer, its service agent or similar qualified
person.
Starting
Before initial start, keep the refrigerator still for two hours be-
fore connecting it to power supply.
Before placing any fresh or frozen food inside the appliance,
the refrigerator should have run for 2-3 hours, or for 4 hours
minimum during summer when the ambient temperature is
high.
Energy saving tips
The appliance should be located in the coldest area of the
room, away from heat producing appliances or heating
ducts, and out of the direct sunlight.
Let hot foods cool down to room temperature before placing
them into the appliance. Overloading the appliance forces
the compressor to run longer. Foods that freeze too slowly
may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry be-
fore placing them in the appliance. This cuts down on frost
build-up inside the appliance.
Appliance storage bins should not be lined with aluminum
foil, wax paper, or paper towels. Liners interfere with cold air
circulation, making the appliance less efficient.
8
Leave enough space for convenient opening of the doors
and drawers or statement by the distributor.
905 mm
628 mm
1596 mm
Organize and label food to reduce door openings and ex-
tended searches. Remove as many items as needed at one
time, and close the door as soon as possible.
1002 mm
135°
Publicidad
