Toshiba Carrier TCB-LK801DP-UL Manual De Instalación página 2

3. How to install
Install (1) Flange, (2) Filter, (3) Cover in indoor unit.
1. Before installation.
Take off two plate for transportation.
2. Install (1) Flange in indoor unit.
Fix (1) Flange with (5) Screws
Ø13/64" × 0.3" (M5×8L;n=4).
Fix (1) Flange with (4) Screws Ø5/32" × 0.3" (M4×8L;n=4).
• The fl ange gets one having black mold parts (fi lter rail)
in the lower direction at the time of the installation of
indoor unit.
4. External Pressure Loss Characteristic
When you use these "Filter kit", pressure-loss characteristics depends on Air Flow.
0.072
0.064
0.056
0.048
0.040
0.032
0.024
0.016
0.008
(1) Flange
Filter kit, Pressure Loss Characteristics
0
0 235 471
3. Install (2) Filter and (3) Cover in (1) Flange.
Fix (3) Cover
with (4) Screws Ø5/32" × 0.3" (M4×8L;n=2).
• Please confi rm that two pieces of fi lters are connected.
• Please attach the cover with both side.
NOTE
• When you use too long screws at attach a suction duct
(locally procured), you can not remove the fi lters by
attack the screws.
• After installation completion, please confi rm the putting
on and taking off of the fi lter by all means.
TCB-LK801DP-UL
706 942 1177
Air Flow (CFM)
-2-
(2) Filters (n=2)
(3) Covers (n=2)
TCB-LK1401DP-UL
1413 1648
Fix (3) Cover
with (4) Screws
Ø5/32" × 0.3"
(M4×8L;n=2).