Descargar Imprimir esta página

Zipro One SGold Manual De Uso página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 86
2. Assemble the handlebar column
Connect computer cables (A1) and (56).
Set the resistance knob so that line (13) from the handlebar post is the longest.
Connect resistance adjustment cables as shown. The upper cable (13) should be
held in the bracket of the lower cable (34).
Insert the end of the upper cable into the bracket slit in the lower cable. Tension
the upper cable and set it to lock its nut on the upper part of the bracket.
See how to complete this step.
Scan the QR code and watch the video.
3. Mount the handlebar
Fix the handlebar (18) to the handlebar column (12) using hexagonal bolts (65)
and nuts (64), and then fix the plastic handlebar cap (66).
Take the cable plug (67) out of the handlebar column (12), run it through the
heart rate cable opening, and then lock the plug (67).
Connect computer cables (17b) with the heart rate measurement cables from
the handlebar (B1) and the resistance adjustment cable (A1), to the computer
cable (17a).
Fix the computer (17) vertically to the bracket in the handlebar column (12) with
the bolt (16).
4. Mount the saddle
Screw the saddle (23) to the saddle column (24) using flat washers (25) and lock
nuts (26). Insert the saddle column (24) with the saddle (23) into the main frame
(29) and lock it on the right height with the saddle height knob (28).
NOTE! Do not exceed the maximum and minimum height on the handlebar post
when adjusting saddle height.
NOTE! Before using the device, make sure the saddle is stable in the guide.
QR code and watch the video.
EN
12

Publicidad

loading

Este manual también es adecuado para:

One s