KTM A61014986044 Instrucciones De Instalación página 23

–
Mount bracket
–
Preassemble cable tie
502887-01
–
Mount both connectors on the intended brackets.
–
Secure the cable with cable tie
502888-01
–
Join plug-in connector
–
Join plug-in connector
Info
If both connectors of the wiring harness are not acces-
sible from the left side of the vehicle, they are with the
other cables behind the headlight mask.
502889-01
–
Place Connectivity Unit in the correct position.
Guideline
Make sure that the cables are not trapped or damaged.
–
Mount and tighten screws
Guideline
Screw, bracket
502890-01
3
(included).
5
(included).
5
.
7
.
8
.
4
.
M5 5 Nm (3.7 lbf ft)
ASSEMBLY 5
9