Whirlpool 3LWED4705FW Guía De Cuidado página 5

CHECK YOUR VENT SYSTEM FOR GOOD AIRFLOW
WARNING
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death
or fire.
Good airflow
Along with heat, dryers require good airflow to efficiently dry
laundry. Proper venting will reduce your drying times and
improve your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role in
good airflow.
Service calls caused by improper venting are not covered by
the warranty and will be paid by the customer, regardless
of who installed the dryer.
USE AUTOMATIC DRY CYCLES FOR BETTER FABRIC CARE AND ENERGY SAVINGS
Use the Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Dry
cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the
dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.
Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
Fire Hazard
To maintain good airflow:
Clean your lint screen before each load.
■
Replace plastic or foil vent material with 102 mm (4")
■
diameter heavy, rigid vent material.
102 mm
Use the shortest length of vent possible.
■
Use no more than four 90° elbows in a vent system;
■
each bend and curve reduces airflow.
Good
Remove lint and debris from the exhaust hood.
■
Remove lint from the entire length of the vent system at
■
least every two years. When cleaning is complete, be
sure to follow the Installation Instructions supplied with
your dryer for final product check.
Clear away items from the front of the dryer.
■
4"
Better
5