HAYGAIN HG ONE Manual Del Usuario página 12

Connecting the steam generator to the hay chest
When the hay chest and steam generator are in a suitable location, use the steam hose to
connect them.
To connect the steam generator to the hay chest
1. Find the quick release fitting at the end of the steam hose.
2. Pull back the barrel of the quick
release fitting on the hose, and push it
firmly onto the hose connector of the
hay chest.
4. To check that the steam hose is securely connected, pull the hose. Ensure the hose is
not kinked or restricted.
Safety
12
General Safety
Read this section carefully before setting up and using your Haygain
Hay Steamer.
Manifold Spikes
Be careful when loading hay into your hay chest. Mind the manifold
spikes at the bottom, they can be sharp.
Use your Haygain Hay Steamer in a safe place
®
Set up your Haygain
specifications on page 11.
Hot steam and temperatures can cause burns
When the steam generator is switched on, it produces hot steam that
comes out of it and the hay chest. Before you open the safety cap of
the steam generator, allow it to cool down.
Areas of the hay chest, for example the manifold spikes, can get very hot.
Take care when you steam forage and unload it.
Setting Up Your Haygain
3. Release the barrel of the quick release
fitting on the hose, so that it slides into
the locked position.
Hay Steamer in a location that meets the
®
Hay Steamer & Safety
®
®
© Haygain