HAYGAIN HG ONE Manual Del Usuario página 26

Pressure inside the steam
generator is too high
caused by a blockage or
restriction in the steam
hose
The steam hose or steam
manifold is frozen.
Why does my plug get warm during steaming
POSSIBLE CAUSE
Warm Plug
Warranty
Your Haygain Hay Steamer comes with a 1 year warranty. The warranty covers the repair
®
and replacement of your Haygain
parts and labour.
All repairs and replacements are at the discretion of Haygain
For more information about the warranty, contact us.
26
Straighten out the steam hose and remove anything
on top of it. Allow your Haygain
down. Disconnect the steam hose at both ends and
flush water through it. Attach the steam generator to
the steam hose and switch it on. If steam comes out
of the steam hose but not out of the safety cap, you
can steam forage as normal. If steam still comes out
of the safety cap, switch off the steam generator and
contact your supplier.
Allow your Haygain
defrost the steam hose, place it in warm water. To
defrost the steam manifold, pour warm water over
it. Read more about working in freezing conditions
on page 18.
SOLUTION
It is normal for an electrical appliance of this type to
become warm during use. However, if it becomes hot
or damaged in anyway discontinue use immediately.
Check for any:
• Loose plug fuse clips
• Overloaded plug
• Corroded pins
• Loose connection within socket
If in doubt please call a qualified electrician to come
and check your set up.
Hay Steamer or a part of it. This includes all required
®
Troubleshooting & Warranty
Hay Steamer to cool
®
Hay Steamer to cool down. To
®
.
®
© Haygain