Publicidad
Idiomas disponibles
Idiomas disponibles
4.Let the blade reach maximum speed. Then direct the
blade to the cutting start-point you want to make;
5.Apply slight pressure to the saw in the direction of the
workpiece, enough to prevent vibrations or blade
breakage;
6.Direct the saw slowly so that the blade moves along
the cutting line drawn on the workpiece until cutting is
complete;
7.To turn the reciprocating saw off, release the
"ON/OFF" switch or safety button.
Speed regulation
The rotation speed can be adjusted through the
"ON/OFF" switch (9). The blade speed increases as the
"ON/ OFF" switch is pressed. When the switch is
completely pressed, the blade reaches its maximum
speed.
Cutting from inside the workpiece
To cut starting inside the workpiece you must use the
following procedure:
1. Drill a hole at the point where you want to start
cutting, large enough to insert the blade (1);
2. Insert the blade into the drilled hole;
Turn on the saw and start cutting according to the
instructions "Starting and stopping the reciprocating
saw";
MAINTENANCE AND CLEANING INSTRUCTIONS
Remove the battery from the cordless reciprocating saw
before performing any checking, maintenance or
cleaning work.
The reciprocating saw does not require any additional
lubrication or maintenance. However, regular cleaning
should be carried out to ensure continuous, trouble-
free operation.
Keep the cutting blades always clean and sharp. Blades
that undergo proper maintenance will become jammed
less frequently, provide an easier handling and greater
efficiency when using the reciprocating saw.
28
Cleaning and storage
Cleaning
After each use, clean all components of the cordless
saw. Clean the cordless reciprocating saw with a clean,
moist cloth or blow with low pressure compressed air.
Careful handling protects the power tool and extends its
service life.
The tool and its ventilation openings must be kept clean.
Clean the ventilation openings regularly or whenever
they become blocked.
Storage
When not in use, store the cordless reciprocating saw in
a dry, clean place, free of corrosive smoke and out of
the reach of children. Remove the battery when storing
the cordless reciprocating saw.
ENVIRONMENTAL POLICY
The packaging has been manufactured using
recyclable materials, which you can dispose of at
your local recycling collection points.
Never dispose of electric machinery in your
household waste!
According to the European Directive 2012/19/CE on
electrical and electronic equipment waste and its
transposition into national law, used power tools must
be collected separately and returned to the collection
points provided for that purpose.
You can get information regarding the disposal of used
power tools from your local recycling authority.
CUSTOMER SUPPORT
Telephone no.: +351 256 248 826
Email address:
international@centrallobao.pt
Website:
www.centrallobao.pt
Publicidad
