Publicidad
Idiomas disponibles
Idiomas disponibles
How to remove the drains cap
Clip the drain cap by needle-nose pliers and pull out.
How to fix the drains cap
1) Insert hexagonal wrench (dia. 0.2" (4 mm)) in a centre head.
2) Firmly insert drains cap.
Firmly insert the drain hose and drain cap; otherwise, water may leak.
In case of right or left piping
• After scribing slits of the front panel with a knife or a marking-off pin, cut them with a pair of nippers or
an equivalent tool.
17-EN
Do not apply lubricating oil
(refrigerant machine oil) when
inserting the drain cap. Application
causes deterioration and drain
leakage from the plug.
Slit
Drain cap
Drain cap
Insert a hexagon
No gap
wrench 0.2" (4 mm)
CAUTION
– 17 –
Installation Manual
Publicidad
