Publicidad
Idiomas disponibles
Idiomas disponibles
FM & FM-stereo reception
Press the " St/Mono " button (13) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In particular when
stereo signals are weak. It is preferable to receive the program in mono.
If stereo signal is being received, the stereo indicator "
receiving.
Hints for best reception:-
-
FM : the receiver has a build-in FM wire antenna (23) hanging at the side of the unit. This wire should be totally unraveled and extended
for the best reception.
Playing compact disc
getting start
1.
Press Function button (6) to select " CD " mode,
2.
Press " CDd door open/close " button (19) to open the cd door.
3.
Place a CD with the printed side facing out inside the compartment & then close the CD door by pressing the " CD door open/close "
button (19) again.
4.
Focus search is performing, the LCD display (12) will show the total number of tracks and will start to playback automatically
Play / pause mode
1.
To interrupt, press the " Play/Pause
again to resume normal playback.
Stop mode
1.
If " Stop
" button (13) is pressed during play or pause mode, system will go to stop mode.
Skip mode (skip up
1.
During play or pause mode, if " Skip up
resume to the playback mode
2.
During play or pause mode, if " Skip down
display and then will resume to the playback mode
3.
After step 2, press " Skip down
Repeat play mode
Press the " Repeat " button (18) during playback to select repeat function, a single track, or all the tracks can be played in difference mode as
follow:-
For CD
(1) Repeat 1
(2) Repeat all track
Indicator
Play mode
on LCD display
Repeat track
& flashing
Repeat all
Off mode
--------------
Random play mode
Press the " Random " button (20) during playback to select random play function, all the tracks of entire disc will be playback in a random
mode and the LCD display will show the " RAN " indicator. Press again to cancel this function & the " RAN " indicator disappear.
CD programming
Up to 20 tracks can be programmed for disc play in any order.
1
Set in cd mode & stop the cd playback.
2
Press the " Mem/Clk-adj " button (14) and " MEM " will appear on LCD display (12).
3
Select a desired track by pressing skip up
4
Press the " Mem/Clk-adj " button (14) to store the track into memory.
5
Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6
When all the desired tracks have been programmed, press " play/pause
7
Press " stop
" button (13) to stop the program playback
8
Press " stop
" button (13) again to clear all stored memory.
The programming model will automatically stop if no button is being pressed in a period of about 60 seconds after pressing the
" Mem/Clk-adj " button.
listen to iPod/iPhone
connecting
Before fitting any dock able iPod/iPhone model on the docking station (22) of the system, please select and insert the
proper docking cradle which supplied with your particular iPod/iPhone model during purchase or purchase separately.
" button (17) once, and the playing track nr. will be flashing on the LCD display (12). Press
/ skip down
)
" button (15) is pressed. It will go to next track and display the track no. and then will
" button (21) is pressed. It will go back to the beginning of the track, original track no. Is
" button (21) again will go to the previous track and remain the play or pause mode.
(3) off mode
or down
" will appear on LCD display (12) to show FM stereo program is now
button (15,21).
" button (17) to play the disc in assigned order.
3
Publicidad
