Publicidad
Idiomas disponibles
Idiomas disponibles
Group of mechanisms
IP proection level
Insulation level
Cable diameter [mm]
Tensile strength of cable
[N/mm
]
2
Device work cycle *
System capacitance
* Device work cycle - S3 intermittent mode, continuous operation time of the device
to the amount of rest in a certain period (10 minutes).
For S3 25% -10 min, the unit can only be operated for 25% of the specified time of use
(2 min and 30 sec), the rest should be reserved for rest, cooling the driving elements (7
min and 30 sec).
For S3 20% -10 min, the device can only be operated for 20% of the specified time (2
min), the remaining time should be reserved for rest, cooling the driving elements (8
min).
1. General Description
This manual is intended to assist you for safe and reliable use. The product is designed
and manufactured strictly according to technical specifications using the latest
technology and components, and maintaining the highest quality standards.
CAREFULLY READ AND UNDERSTAND THIS MANUAL
To ensure long and reliable operation of the product, operate and maintain it correctly,
strictly in compliance with this manual. The technical data and specifications in this
manual are up-to-date. The manufacturer reserves the right to make changes in order
to improve the quality. Taking the technical progress and the possibility of reducing
noise into account, the unit is designed and built in such a way so that risks resulting
from noise emissions are reduced to the lowest possible level.
Explanation of symbols
The product complies with applicable safety standards.
S3-25% 10 min
22 + 6µF / 450V
BEFORE
USE.
M1
IP 54
B
3.8
≥1770
Publicidad
