MSW Motor Technics PROLIFTOR 600 Manual De Instrucciones página 28

x) If the device has been overloaded or subjected to strong shocks, it must be
checked by an authorized service technician before use.
y) Avoid rocking the load.
z) Before suspending the load, always ensure that the space in which it will be
transported is clear of obstructions.
aa) Do not perform mechanical or similar work (welding, cutting, etc.) on
suspended loads.
bb) Loads must be lifted off the ground at the slowest possible speed. When
transporting with the unit, avoid shocks, impacts and sudden changes in
speed. This will reduce the risk of the load falling from a height.
cc) The device is not designed for continuous operation. Observe the operating
cycle of the device.
CAUTION! Although the product has been designed to be safe and has
adequate safeguards and despite the additional safety features
provided to the user, there is still a slight risk of accident or injury
when handling the product. Caution and common sense are advised
when using the product.
3. Instructions for use
The device is designed for vertical lifting and lowering of loads.
The device can be used in factories, farms, construction sites, for the assembly of
devices
The device is not intended for the transport of molten mass products!
The user is responsible for any damage resulting from misuse.
3.1. Product overview
and for loading and unloading goods.