Toshiba Carrier MMD-UP0071 SPH-UL Manual Del Usuario página 84

Confirmation of indoor unit setup
Prior to delivery to the customer, check the address and setup of the indoor unit, which has been installed in this time and fill the check sheet (Table below).
Data of four units can be entered in this check sheet. Copy this sheet according to the No. of the indoor units. If the installed system is a group control
system, use this sheet by entering each line system into each installation manual attached to the other indoor units.
Indoor unit setup check sheet
Indoor unit
Room name
Model
Check indoor unit address. (For check method, refer to Applicable controls in this manual.)
* In case of a single system, it is unnecessary to enter the indoor address. (CODE No.: Line [12], Indoor [13], Group [14], Central control [03] )
Line Indoor Group
Central control address
Various setup
Have you changed high ceiling setup? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed, respectively.
(For check method, refer to Applicable controls in this manual.) * In case of replacement of short plugs on indoor microcomputer P.C. board, setup is automatically changed.
External static pressure
(CODE NO. [5d])
 NO CHANGE
 STANDARD [0000]
 HIGH STATIC 1 [0001]
 HIGH STATIC 2 [0003]
 HIGH STATIC 3 [0004]
 HIGH STATIC 4 [0006]
Have you changed lighting time of filter sign? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed, respectively.
(For check method, refer to Applicable controls in this manual.)
Filter sign lighting time
(CODE No. [01])
 NO CHANGE
 NONE [0000]
 150H [0001]
 2500H [0002]
 5000H [0003]
 10000H [0004]
Have you changed detected temp. shift value? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed, respectively.
(For check method, refer to Applicable control in this manual.)
Detected temp. shift value setup
(CODE No. [06])
 NO CHANGE
 NO SHIFT [0000]
 +1°C 1.8°F [0001]
 +2°C 3.6°F [0002]
 +3°C 5.4°F [0003]
 +4°C 7.2°F [0004]
 +5°C 9.0°F [0005]
 +6°C 10.8°F [0006]
Incorporation of parts sold separately
Have you incorporated the following parts sold separately? If incorporated, fill check mark [×] in each [ITEM].
(When incorporating, the setup change is necessary in some cases. For setup change method, refer to Installation Manual attached to each part sold separately.)
Panel
 Standard panel
 Others ( )
 Others ( )
Indoor unit
Room name
Model
Line Indoor Group
Central control address
Various setup
External static pressure
(CODE NO. [5d])
 NO CHANGE
 STANDARD [0000]
 HIGH STATIC 1 [0001]
 HIGH STATIC 2 [0003]
 HIGH STATIC 3 [0004]
 HIGH STATIC 4 [0006]
Filter sign lighting time
(CODE No. [01])
 NO CHANGE
 NONE [0000]
 150H [0001]
 2500H [0002]
 5000H [0003]
 10000H [0004]
Detected temp. shift value setup
(CODE No. [06])
 NO CHANGE
 NO SHIFT [0000]
 +1°C 1.8°F [0001]
 +2°C 3.6°F [0002]
 +3°C 5.4°F [0003]
 +4°C 7.2°F [0004]
 +5°C 9.0°F [0005]
 +6°C 10.8°F [0006]
Incorporation of parts sold separately
Panel
 Standard panel
 Others ( )
 Others ( )
REQUIREMENT
This check sheet is required for maintenance after installation. Fill this sheet and then pass
this Installation Manual to the customers.
Indoor unit
Room name
Model
Line Indoor Group
Central control address
Various setup
External static pressure
(CODE NO. [5d])
 NO CHANGE
 STANDARD [0000]
 HIGH STATIC 1 [0001]
 HIGH STATIC 2 [0003]
 HIGH STATIC 3 [0004]
 HIGH STATIC 4 [0006]
Filter sign lighting time
(CODE No. [01])
 NO CHANGE
 NONE [0000]
 150H [0001]
 2500H [0002]
 5000H [0003]
 10000H [0004]
Detected temp. shift value setup
(CODE No. [06])
 NO CHANGE
 NO SHIFT [0000]
 +1°C 1.8°F [0001]
 +2°C 3.6°F [0002]
 +3°C 5.4°F [0003]
 +4°C 7.2°F [0004]
 +5°C 9.0°F [0005]
 +6°C 10.8°F [0006]
Incorporation of parts sold separately
Panel
 Standard panel
 Others ( )
 Others ( )
Indoor unit
Room name
Model
Line Indoor Group
Central control address
Various setup
External static pressure
(CODE NO. [5d])
 NO CHANGE
 STANDARD [0000]
 HIGH STATIC 1 [0001]
 HIGH STATIC 2 [0003]
 HIGH STATIC 3 [0004]
 HIGH STATIC 4 [0006]
Filter sign lighting time
(CODE No. [01])
 NO CHANGE
 NONE [0000]
 150H [0001]
 2500H [0002]
 5000H [0003]
 10000H [0004]
Detected temp. shift value setup
(CODE No. [06])
 NO CHANGE
 NO SHIFT [0000]
 +1°C 1.8°F [0001]
 +2°C 3.6°F [0002]
 +3°C 5.4°F [0003]
 +4°C 7.2°F [0004]
 +5°C 9.0°F [0005]
 +6°C 10.8°F [0006]
Incorporation of parts sold separately
Panel
 Standard panel
 Others ( )
 Others ( )
EB99849101