Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
Motor ...................................................................... 18 V DC
Max Flow Rate ....................................................... 10 GPM
Max Head Height .................................................... 54 feet.
KNOW YOUR TRANSFER PUMP
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BRUSHLESS MOTOR
This product features a brushless motor that maximizes
power and performance as well as battery run time.
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to the
product by the manufacturer and require customer instal-
lation. Use of a product that may have been improperly
assembled could result in serious personal injury.
If any parts are damaged or missing, please call
1-800-776-5191 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
FEATURES
Max Lift Height ............................................................ 17 ft.
Inlet/Outlet Connection ............................ 3/4 in. GHT male
THREE SPEED SETTINGS
Three speed settings allows you to select different flow rates
for a variety of tasks.
THREE TIMER SETTINGS
You can choose from three different durations of run time
before the unit will automatically shut down. The pump can
also be operated manually.
ASSEMBLY
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
ASSEMBLE INTAKE FILTER AND HOSE
See Figures 2 - 3.
Attach a discharge hose or standard garden hose (not
included) to the water outlet side of the pump.
Add water or a small amount of silicone based pump oil
(not included) to the water inlet side of the pump to prime
the impeller.
NOTE: For best results, add water to the inlet to prime
the pump. This step is necessary to improve the priming
reliability.
Attach the intake hose to the intake filter.
Attach the other end of the intake hose to the water inlet
side of the pump.
NOTE: Do not turn pump on without both intake and outlet
hoses securely connected. Make sure all connections are
tight. Small leaks can reduce suction and may prevent the
pump from priming.
5 — English
Publicidad
