Shark D-SKWAL 3 Manual Del Usuario página 10

REMOVING THE VISOR
Your D-SKWAL 3 is equipped with a
brand-new quick visor removal system.
Press down twice on either side of the
visor at the same time to easily release
the visor.
1 - Open the visor by applying pressure
under the central visor grip.
2 – Raise the visor.
3 – The visor must be opened as far as
10
it will go.
4 – On each of the mechanical side plates,
on either side of the visor, locate the
button marked «R» on the right side and
«L» on the left side.
WARNING! Don't forget to hold
the visor as soon as you have
pressed the buttons to release it.
1
5 - Press the «L» & «R» buttons simul-
taneously, then use your other fingers
2
on either side to push beneath the visor
to remove it towards the back of the
helmet. Hold on to the visor at the end of
this process.
WARNING! This brand-new quick
visor removal system only works if you
carry out these precise, simultaneous
operations to prevent any risk of the
visor being ripped away while riding.
3
4
5