Shark D-SKWAL 3 Manual Del Usuario página 18

CLEANING THE INTERIOR
The inner fabric parts are washable.
To avoid causing damage, please
closely follow the instructions
below:
The cheek pads and comfort
liner must be washed by hand in
lukewarm soapy water (at approx.
30°). Do not use aggressive
detergents. Instead, use either a
small dose of a mild detergent or
household soap. Fabrics and foams
must be completely dry before use.
Drying must take place at room
temperature. Never iron the fabric
parts. For leather-like or fabric
parts that are integral with the
safety components, use a sponge
or rag slightly dampened with a
little household soap, then rinse
with clean water.
Avoid using too much water on
polystyrene components.
It is important to check that all
interior parts are completely dry
before using the helmet.
WARNING! Damage to the
interior foams will compromise
the proper fit of your helmet. If it
no longer fits your head, the helmet
can come off, leaving your head
unprotected and causing serious
and potentially life-threatening
injuries.
18
FABRICS
Comfort foams and fabrics used for
the D-SKWAL 3 will allow you to
fully appreciate the performance of
your helmet. The parts that come
into contact with your skin are made
of a fabric that guarantees a pleasant
feel, good absorption of perspiration
and good resistance to ageing. Our
fabrics in contact with the skin are
treated to limit the spread of bacteria,
and thus reduce bad odours.
WARNING! Although selec-
ted for their resistance and
durability, all parts of the inner
lining are subject to normal wear
and tear depending on how you care
for and maintain your helmet, how
long it is used for, and the acidity
of your perspiration. If you notice
any ageing, we recommend repla-
cing your interior liners in order to
keep your helmet perfectly clean
and comfortable over time.
Your retailer can provide repla-
cement parts, as well as optional
cheek pads of varying thicknesses
and densities if the standard choice
does not fit the morphology of your
face.
WARNING! Every time you
put on your helmet, check that
it fits your head properly.