Shark D-SKWAL 3 Manual Del Usuario página 11

MAINTAINING THE VISOR
Clean the visor using mild liquid soap,
lukewarm water and a soft damp rag only.
Allow the visor to dry naturally before
reassembling it.
WARNING! Do not use abrasive
cleaning agents, liquids containing
ammonia or alcohol.
For your own safety, never ride with
a visor that does not provide perfect
visibility. If your visor no longer provides
excellent visibility after a period of use,
it must be replaced without fail.
INSTALLING THE PINLOCK®
Your D-SKWAL 3 is pre-designed to fit
a PINLOCK®; a flexible plastic lens that
absorbs moisture. When fitted against
your visor, it offers very effective anti-
fog protection. It prevents the formation
of micro-droplets that compromise your
field of view.
MIN
1 – Place the visor on a work surface and
on a soft covering. Make sure that the
inner surface of the visor is clean. Use a
coin to check that the external adjustment
levers are positioned inwards (positioned
to «INT»).
MAX
1
2 – Place the PINLOCK® lens on the
visor. The silicone seal of the PINLOCK®
lens must be in contact with the inner
surface of the visor. The PINLOCK® logo
is visible on the outside of the visor.
3 - Insert one side of the PINLOCK® lens
into one of the two pins at the ends of the
visor and hold it in position.
4 – Extend and flex the visor and fit the
second side of the PINLOCK® lens into
the second pin. Release the visor so that it
reacquires its curved shape.
2
3
4
11