Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION! The figures in this manual are illustrative only and may vary in
some details from the actual appearance of the product.
2. Safety of use
CAUTION! Read all safety warnings and instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury or death.
The term "device" or "product" in the warnings and in the description of the instructions
refers to
Hammer mill
2.1.
a)
The device is connected to the three-phase system with a power extension
cord. The plug of the extension cord device must fit into the outlet. Do not
modify the plug in any way. Original plugs and matching outlets reduce the risk
of electric shock.
b)
Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device while exposed to direct rain, wet pavement,
or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the power extension cord improperly. Never use it to carry the
device or to pull the plug out of the socket. Keep the cord away from heat
sources, oil, sharp edges or moving parts. Damaged or tangled cords increase
the risk of electric shock.
e)
When operating the product outdoors, use an extension cord designed for
outdoor use. Using an extension cord designed for outdoor use reduces the
risk of electric shock.
f)
If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect the product to electrical mains. Using an RCD
reduces the risk of electric shock.
Electrical safety
Publicidad
