Wiesenfield WIE-PM-2800 Manual De Instrucciones página 37

Install new plates in the reverse order of removal. If the safety clips
•
are damaged during removal, install new ones (not included) and
bend them at the open end.
DISPOSAL OF WASTE APPLIANCES
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
TROUBLESHOOTING
Problem
1. The machine
makes a loud
noise and
vibrates during
operation.
Possible cause
The machine is not well
secured to the ground or
the fastening is loose.
The main shaft is bent
Unbalanced rotors. The
weight of hammers is
uneven.
Action
Correct the fastening,
tighten the screws.
Repair the shaft or replace it
with a new one.
Balance them on the mount.