Publicidad
Idiomas disponibles
Idiomas disponibles
Water Supply and Drain Connections
STEP ONE: Connect the Water Supply
2
3
STEP TWO: Tap into a Water Line
Water Supply
Line
Manual Shutoff
Valve
T-fitting
Humidifier 33-00617EFS—01
Use hot or cold water.
Cut the water line so it reaches from the humidifier
to the main water supply tap.
1
Insert the water line into the gray quick connect
fitting. Insert it fully, and apply modest pull pressure
to ensure a tight fit.
Note: The quick connect fitting can be removed
if you prefer to use a standard 1/4-in. brass
compression nut plumbing connection. Do not
remove the filter if you select this option.
M38987
• Consult local codes for proper plumbing.
• Use the saddle valve provided or a T-fitting and
• Refer to the literature included with the valve you
• Connect the other end of the humidifier water
Saddle Valve
M29605
manual shutoff valve to tap into the water line.
chose and the local plumbing codes. Use proper
technique for the valve.
line to the water valve.
9
Publicidad
