Publicidad
Idiomas disponibles
Idiomas disponibles
Choosing a Mounting Method
Bypass humidifiers use the pressure difference between the supply
and return to move duct air through the humidifier. Access to both
the supply and return are required. The bypass humidifier can be
positioned on either the supply or return duct.
Before beginning Mounting:
I have confirmed local codes for proper plumbing practices.
I have chosen an installation location that meets the requirements on page 4.
STEP ONE: Select the Mounting Location
2
Humidifier 33-00617EFS—01
1
2
3
MCR29877
Choose a location that has access to a water supply
pipe. Cold or hot water can be used.
Select a vertical or horizontal surface on the HVAC
duct work, with adequate space clearances, where
the humidifier can be mounted.
Ensure the location is near a drain. Consult local
plumbing codes for proper drainage. If no main
floor drain is available, see "Appendix B: Advanced
Draining."
Location must also have access to 120 VAC power to
the included transformer.
MCR29871
5
Publicidad
