Publicidad
Technical Information
Information on a Single Channel
You can display all the information (voltage, current, pressure and pump type) for
each single pump. To do this, press the HV-x key, where x corresponds to the
channel to display:
In this case, the pump type, pressure, current and voltage of channel 3 are being
displayed.
Commands
You can give the controller three types of commands:
Switch on/off channels
Activate/disactivate Protect mode
Change output voltage
Switching Channels On/Off
To switch a high voltage channel on or off, keep the HV-ON/OFF key pressed while
you press the HV-x key, where x is the number of the channel you want to switch on
or switch off.
Activating /Disactivating Protect Mode
To activate or disactivate Protect mode, keep the Protect key pressed while you
press the HV-x key, where x is the number of channel for which you want to activate
or disactivate the "Protect" functionality.
Changing the Output Voltage
To change the output voltage choosing between 7KV, 5KV, 3KV, Step-Mode and
Fixed-Mode, keep the Fixed Step key pressed while you press the HV-x key, where x
is the number of the channel for which you want to change the output voltage.
The output voltage changes cyclically between "STEP 7 KV, 5 KV, 3 KV".
214
7
5
-
5
5
- 4 0
X
. X E
-
X
3
X
.
X E - X
+ 7 0
0 0
Agilent 4UHV Ion Pump Controller User Manual
S
t
a r
C
e l
l
X
m B
a
r
X
A
V
S
t
e
p
Publicidad
