Johnson MISTRAL Serie Manual De Instrucciones página 26

For any faults not covered by the Manual, please contact the manufacturer immediately.
Tampering with the unit can result in very hazardous situations. The manufacturer is not liable for any damages caused by
tampering with the unit. The consequences for failing to abide by the Manual shall be borne by the user on its own.
2.1 Meaning of Various Labels
WARNING
A situation that may lead to death or injury.
NOTE
A situation that may cause damage to the unit or
loss of property.
INFORMATION
i
Indicates a useful hint or additional information.
2.2 Warning
Ask professional staff to install (install for the first
time, change the place of the unit or re-install) and
repair the unit and its parts. The installation operator
must have acquired the relevant professional
qualification. Do not attempt to install or repair the air
conditioner by yourself, as any improper operations
may lead to fire, electric shock, personal injury or
water leakage.
Make sure the unit is grounded reliably in accordance
with the laws. Otherwise, it may cause electric shock.
Stop using the air conditioner and consult your dealer
in case of any abnormalities. Otherwise, fire or
electric shock may occur.
Do not attempt to maintain or alter the unit by
yourself. Improper operations may cause water
leakage, electric shock or fire.
Make sure the leakage protection device is installed,
or electric shock may occur.
Do not wash the unit with water, or electric shock may
occur.
To avoid electric shock, do not place any water-filled
container on the unit.
Do not operate the switch with wet hands, or electric
shock may occur.
Do not put your fingers or other objects into the unit,
it can result in serious injury.
Do not obstruct the air supply channel, it may result in
personal injury or damages to the unit.
Check that the supporting structure of the unit is
securely installed after a long period of use, to
prevent fall accidents.
Make sure the installation base and hoisting are
robust and reliable; otherwise, the unit may fall and
lead to accidents.
Do not expose yourself to cold air over a long period.
Too low temperature may cause harm to your health.
Do not expose animals or plants to air outlet to avoid
any harm.
This unit is intended for air handling only. Do not use
it for animal rearing.
Do not install the unit where flammable gas may leak.
Otherwise, fire may occur. Do not install the unit in
potentially explosive atmospheres.
Keep the unit far away from combustible spray to
avoid fire.
Use proper fuse. Do not use iron wire or copper wire,
as it may cause fire or unit abnormality.
When connecting power supply to the unit, follow the
regulations of the local electric company.
Provide separate power switch to ensure the unit can
be disconnected from power properly.
Do not use this unit to store spare parts or other
items.
Please attach enough importance to the signs and
symbols indicated on the unit. Any other potential
hazards not covered in the Manual (if any) should be
specified in labels attached to the unit.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
2.3 Note
Read the Manual carefully and perform a safety
inspection in advance so that you can be fully aware
of the possible dangers as you use or install the unit.
The manufacturer shall not be liable for any personal
or animal injury or damage to any object caused by
incorrect installation, adjustment, maintenance or
improper use.
The manufacturer is not held liable for any damages
resulting from faulty operations against this Manual.
Do not expose this unit to wet or humid environments
as this may damage electrical components.
Do not store this unit in the open air. Do not stack
unpackaged units.
Do not use this unit to store food, plants, precision
instruments, artwork etc.
To operate the unit for the first time, exhaust the air in
the coil; otherwise, the performance may be
compromised.
Clean the inside of the water pipe before use.
Remember to implement anti-freezing measures for
coil in winter. For details, please refer to anti-freezing
instructions herein.
Keep the unit energized even if it is not in service over
a long period.
Adopt self-protection measures when you install,
maintain or clean the unit.
Do not press the unit. Handle it carefully as any
damages may cause unit malfunction.
Reserve enough
maintenance.
Before installation, check whether the unit is reliably
grounded. Otherwise, do not proceed with the
installation. In no circumstances can the earth line for
main power switch be disconnected.
Rotate the fan impeller during installation. Contact
the manufacturer if you hear any abnormal noises.
02
space for installation and
V.1