Kohler K-99695 Guía De Instalación Y Cuidado página 12

Control Settings
Users
System
Available Shower Configurations
Configuration B
UI Settings Lock
Web Settings Lock
Feature Enable
Please read owner's manual regarding possible
risks associated with these features
Massage
Steam
Spa
Lock Users
Save Current as Default
7. Valve Settings
NOTICE TO INSTALLER:
WARNING: Risk of personal injury. Safety precautions must be followed when using shower
features such as [Massage] and [Spa]. Before enabling, ensure the homeowner has read the
associated risks listed in the guides for these features.
IMPORTANT! To ease setup for a multiple valve system, valve 1 (zone 1) should be connected to the
system controller before valve 2 (zone 2). If valve 1 does not appear on the controller Web page before
connecting the second valve to the controller, swap the valves according to the instructions found on the
product page at www.us.kohler.com.
Pre-Programmed Shower Configurations
NOTE: Pre-programmed shower configurations are outlined in the guide found on the product page at
www.us.kohler.com.
If components are installed for pre-programmed shower configurations, the components can be
automatically populated on the Web pages.
Shower configurations are available based on the number of valves connected to the controller.
To populate pre-programmed configurations, select the appropriate dropdown option in the
[Available Shower Configurations] field. The shower components will appear in the outlet options
on the valve menus.
To enable shower features, such as [Massage], go to the [Settings] tab, then click on [System]. Safety
instructions for each feature must be read by the homeowner before it is enabled. Refer to the
guide for each feature.
Custom Shower Configurations
NOTE: Custom shower components will need to be selected manually on the Web page valve menus.
NOTE: The spa feature is not available on custom configurations.
To check or configure valve settings, go to the [Settings] tab, then click on [Valve 1].
1218131-2-D
Service
Valve 1 Valve 2
Control Settings
System Users
Valve 1
Outlet 1
Default
Massage
Auto Purge
Steam Deluge
Temperature
Default Temperature 100
Max Temperature 113
Cold Water 5 Minutes
7 Minutes
Auto Purge
Max Run Time
12
Service
Valve 2 Interface Spa
Outlet 2
Default
Massage
Auto Purge
Steam Deluge
Custom Massage Order 1
Custom Massage Order 2
Swap Valves 1 and 2
Kohler Co.