Kohler K-99695 Guía De Instalación Y Cuidado página 7

2. Connect the Components
IMPORTANT! Make drip loops in all cables.
IMPORTANT! Disconnect the power from the controller before connecting the cables.
If not already installed, install any digital interfaces, digital valves, and optional components for
your system configuration.
Route all component cables to the controller location.
Gently press each connection into the proper port until it fully clicks in place.
Connect the power supply to the controller. Verify that the digital interface(s) illuminate.
Before Operating the System For the First Time:
Download and install the latest software for connected components. This may take an hour or more to
complete based on system configuration and internet connection speed. Do not disconnect the power from
any components during software download and installation.
Refer to the "Download/Install Software" section for download instructions.
For recommended WiFi adapter options, contact the KOHLER Customer Care Center at
1-800-4KOHLER (1-800-456-4537).
Kohler Co.
Power Cord
Status LED
Ethernet or WiFi Adapter
Not Used
Digital Interface(s) and
Optional Components
Digital Mixing Valve(s)
7 1218131-2-D