Descargar Imprimir esta página

Silvercrest SST 40 A1 Instrucciones De Uso página 14

Ocultar thumbs Ver también para SST 40 A1:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 160
Operation
Using the appliance
CAUTION
The suction opening must always be open and must not be blocked. Blockages
lead to overheating and damage to the motor.
Do not vacuum shag pile carpets with the floor nozzle r. The rotary brush u
can become tangled in the carpet and jam.
NOTE
Make sure that the HEPA filter p and the coarse filter o are always inserted
before using the appliance.
As soon as the suction power noticeably decreases and the last indicator
lamp 7 flashes green, connect the appliance to the mains adapter l.
Slide the On/Off switch
suction power). The indicator lamp 7 lights up green, the LED light i on the
floor nozzle r lights up and the rotary brush u starts turning.
Move the floor nozzle r over the areas to be vacuumed. Hold the handle 2
so that the floor nozzle r slides flat over the floor.
Slide the On/Off switch
The rotary brush u stops, the indicator lamp 7 and the LED light i go off.
Adjusting the suction power
Level 1
This level is suitable for simple cleaning work. The operating noise level is low.
The appliance will achieve the maximum runtime.
Level 2
This level is suitable for normal cleaning work. The appliance will achieve a medium
runtime.
Level 3
This level is suitable for demanding cleaning work. The appliance will achieve the
shortest runtime.
NOTE
Always vacuum at level 3 when using additional accessories in order to achieve
optimum vacuuming results.
SST 40 A1
1 to the required level (see section Adjusting the
1 to position 0 when you want to stop vacuuming.
GB │ IE
 11

Publicidad

loading