Product Overview - hillvert HT-FORBES-600 Manual De Instrucciones

s) Keep the unit away from sources of fire and heat.
t) Do not overload the device.
u) Do not block the ventilation openings of the unit!
v) Before digging the trench, make sure that there are no underground utilities
such as pipes (gas, water) or electric cables, etc.
w) The running engine becomes very hot. Do not touch a hot engine as it can
cause burns.
x) Before turning on the unit, check the engine oil level and add it to the
appropriate level if necessary. Operating at too low an oil level can lead to
overheating and even engine damage!
y) Report any leakage of operating oils from the machine to the relevant
authorities or comply with the legal requirements in your area of use.
z) The engine exhausts contain poisonous carbon monoxide. Remaining in an
environment containing carbon monoxide can lead to unconsciousness or
even death. Do not start the engine in an enclosed or poorly ventilated room.
aa) Protect the engine from heat, sparks, and fire. Do not smoke near the machine!
bb) Gasoline is highly flammable and explosive. The engine should be stopped and
left to cool down before refueling.
cc) Caution! Wrong fuel may cause damage to the engine.
dd) Allow the motor to cool down for at least 30 minutes before transporting or
storing. Placing the machine in a cooler, shaded area will help to cool it down
faster.
CAUTION! Although the product has been designed to be safe and
has adequate safeguards and despite the additional safety features
provided to the user, there is still a slight risk of accident or injury
when handling the product. Caution and common sense are advised
when using the product.
3. Instructions for use
The machine is designed for digging shallow and rather narrow trenches, e.g. for
electric cables or irrigation systems.
The operator is responsible for any damage caused by misuse.
3.1.

Product overview

NOTE: illustrative picture - possible slight visual differences depending on the
model.