NOTE
If the pump is used for conveying excessively muddy water, the impeller unit will be subject to
increased wear and will require earlier replacement.
Thoroughly clean the pond or pool before installing the pump.
Install the pump at a raised level above the bottom of the pond. This reduces intake of muddy
water.
Avoid direct sunlight when the components of the unit are not immersed, as this can cause
them to heat up considerably. Use a protective cover if necessary.
Turning the pump casing
The pump outlet can be aligned as follows:
• Horizontally, pointing to the right (standard).
• Vertically, pointing up (conversion required).
AMX0023
9