Questions, problems, missing parts?
Before returning the unit to your dealer, call us at 330-274-8317, Monday-Friday, or email us at
customerservice@atlantic-oase.com.
IMPORTANT SAFETY INFORMATION
Electrical connection
• Special regulations apply to electrical installation in outdoor areas. Only allow a qualified elec-
trician to perform the electrical installation.
– The qualified electrician has the required professional training, knowledge and skills to per-
form electrical installations in outdoor areas. The qualified electrician can detect potential
risks and adheres to regional and national standards, regulations and directives.
– For your own safety, please consult a qualified electrician.
• Only connect the unit if the electrical data of the unit and the power supply match.
• Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated
fault current of max. 30 mA by means of a fault current protection device.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use
(splash-proof).
• Protect open plugs and sockets from moisture.
Safe operation
• Do not use the unit, if electrical lines or the housing are damaged.
• Dispose of the unit if its power connection cable is damaged. The power connection cable can-
not be replaced.
• The impeller unit in the pump contains a magnet with a strong magnetic field that may affect
the operation of pacemakers or implantable cardioverter defibrillators (ICDs). Always keep a
distance of at least 8 in (0.2 m) between the implant and the magnet.
• Do not carry or pull the unit by its power cable.
• Route lines so that they are protected from damage and nobody can trip over them.
• Never make technical modifications to the unit.
• Only carry out work on the unit that is described in this manual.
• Only use original spare parts and accessories.
• Should problems occur, please contact the authorized customer service or OASE.
WARNING
Serious injury or death due to dangerous electrical voltage is possible with an electrical device in
water operated with a voltage U > 12 V AC or U > 30 V DC.
Disconnect all electrical devices in the water from the power supply before reaching into the
water.
Disconnect the device from the power supply before starting work on the unit.
4