Publicidad
Idiomas disponibles
Idiomas disponibles
Remote control address:
System control reception strength
Software version
Change code
Language, display
Language:
Display brightness:
Offset
Room temperature: K
Factory settings
0020298957_02 Operating and installation instructions
Each remote control has a unique address,
starting with Address 1. For each additional
remote control, the address increases continu-
ously.
Reception strength between the radio receiver
unit and product
– 4: The radio link is within the acceptable
range. If the reception strength is < 4, the
radio link is not stable.
– 10: The radio link is highly stable.
Defining an individual access code for the in-
staller level
Defining the language that is to be shown on
the display.
Brightness during active use.
Comparison of the temperature difference
between the measured value in the system
control and the value for a reference thermo-
meter in the living room.
The remote control resets all of the settings to
the factory settings and calls up the installation
assistant.
Only the competent person can operate the
installation assistant.
11
Publicidad
