Vaillant VR 92f/3 Manual De Uso E Instalación página 12

3 -- Start-up and set-up
3.1 Checking the scope of delivery
Quant- Contents
ity
1 Radio remote control
1 Fixing material (2 screws and 2 wall
plugs)
4 Batteries, LR06
1 Documentation
▶
Check that the scope of delivery is com-
plete and intact.
3.2 Requirements for start-up
To start up the product, the following pre-
requisites are required:
– All of the system components, the sys-
tem control and the radio receiver unit
have been installed and set up.
– The power supply for the entire heating
installation is switched on.
– The system components are switched
on.
– The individual installation assistants for
the different system components have
been completed successfully.
3.3 Inserting batteries into the
product
1. Stand next to the radio receiver unit
with the product.
B
A
2. Open the battery compartment.
12
Danger!
Risk of death caused by un-
suitable batteries!
If batteries – whether re-
chargeable or non-re-
chargeable – are replaced with
the wrong type of battery, there
is a risk of explosion.
▶
Ensure that you use the cor-
rect battery type when repla-
cing batteries.
▶
Dispose of used batteries in
accordance with the instruc-
tions in this manual.
3. Insert the batteries in the battery com-
partment, making sure that the poles
are the right way round.
◁
The installation assistant starts.
4. Close the battery compartment.
3.4 Installing and setting up the
product
The installation assistant starts automatic-
ally as soon as the product is supplied with
voltage.
The installation assistant guides you
through the required functions. For each
function, you should choose the set
value that is best suited to the heating
installation being installed.
▶
If Pair is shown in the display, press the
button on the radio receiver unit.
◁
The LED on the radio receiver unit
flashes green.
▶
To check the reception strength on the
chosen installation site, proceed as
follows:
▶
Take the remote control to the chosen
installation site for the product.
▶
Close all doors behind you on the way
to the installation site.
▶
If the display is off, press
upper side of the product in order to
activate the display.
Operating and installation instructions 0020298957_02
on the