Enerpac WEN40 Serie Manual De Instrucciones página 8

Available modular accessory kits.
HE1 Heat Exchanger 24VDC
HE2 Heat Exchanger 115VAC
LS1 Float Switch
PFK25 Return Filter Kit
PSCK11-Pressure Switch Kit
PSCK12-Pressure Switch Kit
PSCK13-Pressure Switch Kit
PSCK14-Pressure Switch Kit
WMK01 Porting block (remote valves) #6 SAE
WMK02 Porting block (remote valves) 1/4 BSPP
WMK12 VP Series Manifold
WMK21 Two Station Manifold DO3
WMK22 Two Station Manifold CETOP3
WMK41 Four Station Manifold DO3
WMK42 Four Station Manifold CETOPO3
See Workholding catalog for ordering information.
500-3000 psi (34.5-207 bar)
3000-5000 psi (207-345 bar)
1450-5000 psi (100-345 bar)
290-3045 psi (20-210 bar)
• Recommended for applications in which the pump is running in high
ambient temperature or high duty cycles
• Stabilizes oil temperature at approximately 130°F (50°C) 75°F (24°C)
Ambient temperature
• Increases oil life and consequently that of the pump and other hydraulic
components
• Available in 24VDC or 115VAC
• Senses both oil level and temperature
• Float switch shuts down pump before the oil reaches an unsafe level
• Temperature switch shuts down pump when the oil has reached an unsafe
operating temperature; protecting the pump and components from
overheating
• Extends life of pump and other hydraulic components, reduces damage
created by oil borne contaminants
• Internal pressure by-pass
• Provides 25 micron nominal filtration
• Maintenance indicator included
• Can be easily mounted to the pump
• Signals when the hydraulic circuit has reached the desired pressure
• Automates the clamp or unclamp cycle
• Monitors system pressure, and can be tied to external controls
• Manifold mount pressure switches mounts directly to Workholding
series manifolds and VP series control valves
• Can be used remotely with optional PB-2 manifold
• Signals when the hydraulic circuit has reached the desired pressure
• Automates the clamp or unclamp cycle
• Monitors system pressure, and can be tied to external controls
• Necessary to mount valves, pressure switch, filter kit, heat exchanger and
gauges to basic pump unit
• In single, two and four valve stations horizontal or up to 8 VP valve stations
vertical
• With DO3, CETOP03, Enerpac VP , or porting block for remote valves.
8