Publicidad
Idiomas disponibles
Idiomas disponibles
DECK
RELEASE
HANDLE
J-HOOK
Fig. 16, RYRM8006
DECK
RELEASE
HANDLE
J-HOOK
Fig. 16, RYRM8007
MAINTENANCE
1
2
3
WRENCH
REPLACING CUTTING BLADES
1
See Figures 17 - 18.
WARNING:
Only use replacement blades and blade bolts authorized
by the manufacturer of your riding mower. Unauthorized
2
blades and/or blade bolts could break, allowing the blade
to come loose, resulting in possible serious personal
injury and damage to the mower.
NOTE: Make certain all parts are replaced in the exact order
3
in which they were removed.
„ Move the mower to a level surface. Make sure to set the
parking brake and blade engage knob is down.
„ Stop the motor and remove the start key.
„ Raise the height of the cutting deck to its highest position
to allow access to blades.
NOTE: If necessary, raise the mower by placing on a lift or
using a jack and jack stands to gain access to the blades.
21 — English
WRENCH
BLOCK OF WOOD
BLOCK OF WOOD
BLADES
Fig. 17, RYRM8006
BLADES
Fig. 17, RYRM8007
Publicidad
