Ryobi RYRM8006 Manual Del Operador página 26

PREPARING FOR USE AFTER STORAGE
The following steps should be taken before using the mower
after it has been stored:
„ Review maintenance chart.
„ Fully charge the batteries.
„ Check tire pressure and inflate as needed.
„ Briefly drive the mower and check all systems and com-
ponents to ensure they are functioning correctly.
„ Periodically inspect for frayed and deteriorated insulation
on wires.
MAINTENANCE SCHEDULE
Check Brake Operation
Check Tire Pressure
Check Safety Interlock System
Check for Loose Fasteners
Clean Debris From Mower
Grease Transaxle Fittings
Check/Replace Mower Blades
NOTE: Maintenance should be performed more frequently when mower is used in dusty areas.
When mower has exceeded the maximum figures specified in the table, maintenance should still be cycled according
the intervals of time or hours stated herein.
If you are unsure how to perform any of the maintenance items listed above, take the mower to an authorized service center for
assistance.
MAINTENANCE
Inspect Every
Before 25
Each Use Hours
X
X
X
X
X
X
X
26 — English
Every Every
50 Hours 100
or Yearly Hours
GREASE
FITTINGS
Fig. 24
Before
Storage
X
X
to