Dri-Eaz DrizAir 1200 Manual Del Propietário página 13

Owner's Manual
2. Press PURGE to remove residual water.
DEFROST MODE
During normal operation, the temperature sensor detects frost forming on the coils,
causing a defrost cycle to start. The display will read DEFROST ON. Dehumidification
stops during the defrost cycle. When the unit completes the cycle, the display returns
to DEHUMIDIFIER ON.
ERROR MESSAGES
If the 1200's onboard diagnostics discover a problem, the unit will display "GET
SERVICE," followed by "ER" and a numeral from 01 to 09. If this message appears, first
follow these steps:
1. Unplug the unit and then plug it back in. This may re-set the electronics.
2. If the error message reappears, try the solution (if one is listed) in the
Warnings
3. If the error message still appears, please contact the Dri-Eaz Service Department
at 888-867-3235.
DrizAir 1200 Owner's Manual
" section.
14
13
"Error and
© 2023 Legend Brands, Inc.