hafele WT 400 Manual De Instrucciones página 92

6.7 Use of the WTX 200 extension board with 2 additional relay output ports
and 1 additional analogue/digital input port
Fig. 19: WTX 200 - position of the jumpers when used for 2 additional relay output ports and 1
additional analogue/digital input port
If the additional connection options (connection 1-6) are to be used for 2 electric strikes and
1 door signalling contact, for example, the jumpers must be positioned as shown in figure [A].
Assignment of connections 1 - 6 if the jumpers have been positioned as shown in the diagram:
Controller screw terminals
1
2
3
4
5
6
92
Functionality
NO 1 (relay 1 normally open contact)
C 1 (or COM 1) (relay 1 central contact)
NO 2 (relay 2 normally open contact)
C 2 (or COM 2) (relay 2 central contact)
IN 4 (input port 4)
GND
A