Publicidad
Idiomas disponibles
Idiomas disponibles
Receiver Placement
STEP 1
With the gate in closed position (creating a 90° angle to the wall the hinges are
on) place the receiver adjustment knob in the latch assembly wall mount (D
or N). Mark the location of the holes, making sure you are located on top of a
stud. Do this for the upper and lower latch wall mounts (F or O).
NOTE: Use the handle and hinge mounting paper (L,M) to help mark exact
location of upper and lower wall mounts. Must use parts D with F and N with O.
STEP 2
Open the gate (swing it away from the stairs). Mount the upper and lower
receivers using the 2" wood screw.
NOTE: Use (D,F) or (N,O) to stop gate from swinging over stairwell. Parts
are marked with "A" and "B" on backside. Do not assemble with gate
swinging over stairwell.
10
English
Publicidad
