GreenWorks RSG401 Manual Del Operador página 7

6 PROPOSITION 65
WARNING
This product contains a chemical known to the
state of California to cause cancer, birth defects
or other reproductive harm. Some dust created by
power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated
lumber.
Your risk of exposure to these chemicals varies
depending on how often you do this type of work. To
reduce your exposure to these chemicals, work in a
well-ventilated area, and work with approved safety
equipment, such as dust masks that are specially
designed to filter out microscopic particles.
Save these instructions.
7 INSTALLATION
7.1 UNPACK THE TOOL
WARNING
Make sure that you correctly assemble the tool
before use.
WARNING
• If parts of the tool are damaged, do not use the
tool.
• If parts are missing, do not operate the tool.
• If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the tool from the box.
5. Discard the box and packing material in
compliance with local regulations.
WARNING
For your personal safety, do not insert battery before
the tool is assembled completely.
English
7.2 INSTALL THE BLADE
Before you install the blade, remove the battery pack
from the tool.
1. Turn the tool free blade change (5) in the
direction of arrow and hold.
2. At the same time, push the blade to the deepest
position.
3. Release the tool free blade change.
Make sure that the blade is tightened. When cutting
wet wood, please clean up the dust and debris near
the blade change in time.
7.3 REMOVE THE BLADE
1. Turn the tool free blade change in the direction of
arrow and hold.
2. At the same time, pull the blade out.
3. Release the tool free blade change.
7.4 ADJUST THE SHOE
1. Press and hold the shoe release button (6).
2. Move the shoe to one of the four settings.
3. Release the shoe release button.
7.5 INSTALL THE BATTERY PACK
7
NOTE
NOTE
EN