Publicidad
Idiomas disponibles
Idiomas disponibles
Components
1
Trigger switch
2
Lock-off switch
3
Switch handle
4
Blade guard
5
Bail Handle
6
Blade
7
Battery housing
8
Battery
9
Battery release button
10
Powersaw
11
Sheath
10
To reduce the risk of serious personal injury, turn unit
off and remove the battery pack before making any
adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Installing & Removing Battery Pack
(Figure 3)
NOTE:
For best results, make sure your battery pack is fully charged.
To install the
battery pack
(8) into the tool
handle, align the
battery pack with
the rails inside
the tool's handle
and slide it into
the handle until
the battery pack is
firmly seated in the
tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release
button (9) and firmly pull the battery pack out of the tool handle.
Insert it into the charger as described in the charger section of
this manual.
OPERATION
4
6
WARNING
Figure 3
5
11
Figure 2
Proper Hand Position (Figure 4)
To reduce the risk of serious personal injury, always use
proper hand position as shown.
To reduce the risk of serious personal injury, always hold
securely in anticipation of a sudden movement.
Proper hand
9
position requires
one hand on the
switch handle (3)
and one hand on
the bail handle
(5). Never hold
the unit by the
8
blade guard (4).
13
1
WARNING
WARNING
3
5
4
Figure 4
9
7
8
3
2
Publicidad
