Publicidad
Idiomas disponibles
Idiomas disponibles
DO NOT remove cut material, or hold material to be cut,
•
while the blades are moving Always stop the unit and
remove the battery before attempting to remove debris or
jammed material.
•
Allow time for moving parts to stop after turning the unit off.
Blades coast for a short time.
DO NOT cut above shoulder height.
•
DO NOT use the front guard as a handle.
•
•
Keep the blades sharp and clean.
•
Follow all lubrication instructions provided in this manual.
•
The blades become very sharp from use. Always wear heavy
gloves when handling, replacing or cleaning the blades.
Other Safety Warnings
•
Maintain the unit with care. Follow all maintenance
instructions in this manual.
•
DO NOT perform maintenance procedures other than those
described in this manual. DO NOT attempt to repair the unit;
there are no user-serviceable parts inside. All service, other
than the maintenance procedures described in this manual,
should be performed by an authorized service center.
•
DO NOT use the unit if it is not working correctly, has been
dropped, damaged, left outdoors or dropped into water. Have
the unit serviced by an authorized service center.
•
Never remove, modify or make inoperative any safety device
furnished with the unit.
•
Before inspecting, maintaining, cleaning, storing,
transporting or replacing any parts on the unit:
1. Stop the motor. Refer to Switch.
2. Wait for all moving parts to stop.
3. Remove the battery.
4. Allow the unit to cool.
•
Secure the unit while transporting.
•
Store the unit in a dry place, secured or at a height to prevent
unauthorized use or damage. Keep the unit out of the reach
of children.
•
Never douse or squirt the unit with water or any other liquid.
Avoid getting water in the motor and electrical connections.
Keep handles dry and clean (free from debris, oil and grease).
Clean the unit after each use. Refer to Maintenance. DO NOT
use solvents or strong detergents.
•
Keep these instructions. Refer to them often and use them to
instruct other users. If you loan this unit to others, also loan
them these instructions.
SAVE THESE INSTRUCTIONS
SAFE OPERATION PRACTICES
Safety & International Symbols
This operator's manual describes safety and international symbols
and pictographs that may appear on this product. Read the
operator's manual for complete safety, assembly, operating and
maintenance and repair information.
V ........................volts
Hz ......................hertz
min ....................minutes
or DC ....direct current
.....................Class I Construction
(grounded)
. . . /min .............per minute
BPM ...................beats per minute
IPM ....................impacts per minute
RPM ...................revolutions per
minute
sfpm ..................surface feet per
minute
SPM ...................strokes per minute
OPM...................oscillations per
minute
A ........................amperes
W .......................watts
7
or AC ..........alternating current
or AC/DC ...alternating or direct
current
.....................Class II Construction
(double insulated)
n o .......................no load speed
n ........................rated speed
.....................earthing terminal
....................safety alert symbol
....................visible radiation
....................avoid staring at light
....................wear respiratory
protection
....................wear eye protection
....................wear hearing
protection
....................read all
documentation
IPXX ...................IP symbol
Publicidad
